All these components are found in this engine
351 cleveland block
351 cleveland crank reground
302 rods resized
ARP rod bolts
ARP main Stud Kit
Hypertech Liquid forged Pistons (4.030")
Speed Pro moly plasma rings
Clevite bearings
Felpro Gasket set
Russell Oil Pan
Durabond balancer
Rollmaster timing chain
Mellings oil pump
ARP oil pump drive shaft
AFD custom camshaft and lifter kit (mechanical flat tappet)
AFD 2V OR SP4VS Complete Street Alloy Cylinder Heads
AFD Intake manifold
AFD alloy stud mounted roller rockers
Manley 7/16 screw in studs and guide plates
Comp Cams hardened pushrods (5/16)
Ford racing alloy valve covers

(cylinder head and camshaft selection will vary based on application and desired results)

MACHINING LIST

Line hone main tunnel
sonic test bores
torque plate bore and hone cylinders
deck surfaces
balance rotating assembly
assemble entire engine
dyno run in

This engine is fully run in and dyno tested with your carb and ignition unless arrangemants are made with AFD to supply these components.
Dyno results and maintance program are supplied with the engine and list of every part and it's part numbers that go into our engines.This package will freely make power to 7000rpm with an awesome spread of torque.

This engine is run in and dyno tested with your carb and ignition unless arrangemants are made with AFD to supply these components.
Dyno results and maintance program are supplied with the engine and list of every part and it's part numbers that go into our engines.This package will freely make power to 7000rpm with an awesome spread of torque.

All these components are found in this engine
351 cleveland block
Scat 4340 4.000"stroke crank
Scat 6.0" H-beam rods
ARP main Stud Kit
Probe/SRP forged Pistons (4.030")
Speed Pro moly plasma rings
Clevite bearings
Felpro Gasket set
Canton Oil Pan
Durabond balancer
Rollmaster timing chain
Mellings oil pump
ARP oil pump drive shaft
AFD custom camshaft and lifter kit (solid FT
AFD SP4VS Complete Comp Cylinder Heads
AFD SP4V Intake manifold
AFD alloy stud mounted roller rockers
Manley 7/16 screw in studs and guide plates
Comp Cams hardened pushrods (5/16)
Ford racing alloy valve covers

(cylinder head and camshaft selection will vary based on application and desired results)

MACHINING LIST

Line hone main tunnel
sonic test bores
torque plate bore and hone cylinders
deck surfaces
balance rotating assembly
assemble entire engine
dyno run in

This engine is fully run in and dyno tested with your carb and ignition unless arrangemants are made with AFD to supply these components.
Dyno results and maintance program are supplied with the engine and list of every part and it's part numbers that go into our engines.This package will freely make power to 7000rpm with an awesome spread of torque.

All these component are found in this engine
Dart or SVO 9.200" Block
4.100" 4340 crank
Manley 6.0" H beam rods
custom 4.165" forged piston
ARP main Stud Kit
Canton Oil Pan
Durabond balancer
Rollmaster timing chain
Mellings oil pump
ARP oil pump drive shaft
custom camshaft
AFDSP4VR Alloy Cylinder Heads
SP4VR Intake manifold
Stainless Race rockers
hardened pushrods (5/16)
alloy valve covers
custom built 950 carb

(cylinder head and camshaft selection will vary based on application and desired results)

This engine is fully run in and dyno tested
.This package will freely make power to 7000rpm with an awesome spread of torque.